Countdown To Black Friday Starts Now! • New Deals Revealed Each Day! • November 20-24

Shop all sites, use one cart!

$150.00 until FREE SHIPPING!

Warbotron - WB01-F X-Ray & Gun Set

by Warbotron TFsource code: WB01FXR/76A
  • FREE Shipping on orders over $150
    - Details
    • Free shipping is available for domestic shipments only and only offered on the lowest cost shipping method. This amount is then subtracted on any higher cost shipping methods.
    • Free shipping is available on each domestic order $150 or more, if you split your orders, each must be $150 or more or will not qualify for free shipping
    • International shipping is also reduced on all orders $150 or more, but not free.
    • No code required, free shipping and reduced international shipping is automatically calculated in checkout!
  • Buy this item and earn 5 Source Points! Details
  • C9 Box
    95% of TFSource's inventory ships out in a C9 / "Collectors Grade" to mint grade packaging for no extra charge. A C9 box generally has minimal wear, a kink, or other minor damage to the packaging. By placing an order all customers accept that 5% of the time packaging may be below C9 or collectors grade. For more information on box grading please see our FAQs.
    / Collectors Grade packaging

Product Specs

Manufacturer Warbotron
Packaging MISB (Mint in Sealed Box), Case Fresh from a Factory Sealed Case
In Stock and Ready to Ship
Usually ships out
same business day
Orders placed by 1PM CT where all items on the order are instock, usually ship out the same day. Orders placed after 1PM CT usually ship out next day, however TFSource will make every effort to ship out every instock order placed within the same business day. Certain restrictions apply, see our FAQs on shipping for more information on specifics.

$9.99 $28.99   66% Off

Product Details

This add-on set is to add to your WB01 Warbotron combiner set. Includes X-ray mini-figure and Warbotron gun which can split apart into many individual parts and figures!

Note: WB01F X-Ray set comes unassembled. The thigh swivel of this is a known QC issue, which may lead to breakage during assembly. We recommend watching a YouTube "Tips & Tricks" build guide for the WB01F X-Ray, released by Radio Free Cybertron, which shows how to easily correct this issue; prior to assembly!

Warbotron combiner figure sold separately. Unfortunately Warbotron decided this item is not provided for free to any retailers, but at a reduced cost, therefore the set reflects the lower pricing.

Customer Reviews

4 stars based on 8 reviews Write a Customer Review
4 out of 5 stars
WARBOTRON WB01F X-RAY & GUN SET
By Jack on April 14, 2017
Great set, like to see more like this in future Warbotron sets. The set DOES have issues though.
The thigh swivel doesn't work well on X-ray unless you shave small amounts of plastic off. Also unless you like painting, the figure isn't gonna look that good (eye needs painting yellow & ears silver). The gun is good but is a bit plain in just grey (again, might want painting) and not just Warbotron figures, such as hasbro Bruticus can hold some components. Nice cheap set at $15.99 or approximately £12. Highly recommended by me. ( just to mention you do build this from sprues)
Love this project
By Rodimus Vader on March 12, 2017
1. Enjoyed assembling this guy again only I took my time and used an exacto knife for precision cutting. Also shaved off some plastic so the leg/thigh could twist and not snap off. Did not over tighten the screws so as not to discolor the plastic bits.
2. Weapons set got the same treatment as notshockwave. Made sure everything was done with precision and care. Last time I gold plated the knives and sword blades and attached them to my dry brushed Bumblebee. Ended up with one sick looking bot!!! This time it's for a custom Combiner Wars G2 Bruticus I'm working on that's already looking b__ a__!!!
Just good
By svalverde on December 14, 2016
Very good looking, very good alt mode, bad construction instructions, pieces to form legs are shit, I almost broke everything, even have to cut some parts to everything go in place. The size doesn't match with anything other Transformers line.
Warbotron
By Bishop on March 08, 2016
Well i have to say .. I truly love the Shockwave figure... but the only flaw and inturn on mine was a fatal one.. the legs do not go on easy .. Like extremly hard to the point on broke trying to get it on. I will be ordering another because like i said its great.. The gun that you build is incredible . i have my coworkers putting in orders.. 100 out or 10
easy to build just be careful
By Mr.Fixit on March 01, 2016
well crafted, transforms easily, just remember to use a little sand paper or a file to scuff some points and make life easier for yourself.
warbotron xray & gun set
By robot.macgyver on January 31, 2016
X-ray has awful qc, & broke in several places while assembling, despite most careful efforts. Gun set is ok though. worth it?
Liked it... until it broke.
By Alex Reynard on December 12, 2015
I knew about the mushroom peg on the hip, scraped out the slot, pressed as carefully as I could, and it STILL snapped. Not pleased.

That said, the big gun is neat. Everything looks good and pegs together well. And X-ray is nicely proportioned for a little fella. It's just unfortunate I needed Krazy Glue to complete the build.
Recipe includes sandpaper, scraping device, and butter
By vtxcalibur on December 02, 2015
Just letting yall know this kit will need modification to work properly. When joining x-rays hip piece to thigh piece there is a mold disfunction on the thigh slot. You must scrape the extra material inside toward the top out or the hip tab won't go in, you will break it. Take as much material out as possible then put butter or grease on the hip tab and press with your fingernail on the tab as you twist the hip. Then run hot water when finished to remove grease or butter.