Cyber Monday Sale  •  Up to 70% off  •  Save Now

Shop all sites, use one cart!

$150.00 until
FREE SHIPPING!
  • Free shipping is available for domestic shipments only and only offered on the lowest cost shipping method. This amount is then subtracted on any higher cost shipping methods.
  • Receive reduced shipping on order $150 or more for non-continental US states orders including Alaska, Hawaii, Guam, Puerto Rico regions.
  • International shipping is also reduced on all orders $150 or more, but not free.
  • No code required, free US shipping and reduced international shipping is automatically calculated in checkout!

Jiangxing JX MetalBeast 01 Winged Dragon

by Jiang Xing TFsource code: JX01WING
  • FREE Shipping
    - Details
    • Free shipping is available for domestic shipments only and only offered on the lowest cost shipping method. This amount is then subtracted on any higher cost shipping methods.
    • Free shipping is available on each domestic order $150 or more, if you split your orders, each must be $150 or more or will not qualify for free shipping
    • International shipping is also reduced on all orders $150 or more, but not free.
    • No code required, free shipping and reduced international shipping is automatically calculated in checkout!
  • Buy this item and earn 245 Source Points! Details
  • C9 Box
    95% of TFSource's inventory ships out in a C9 / "Collectors Grade" to mint grade packaging for no extra charge. A C9 box generally has minimal wear, a kink, or other minor damage to the packaging. By placing an order all customers accept that 5% of the time packaging may be below C9 or collectors grade. For more information on box grading please see our FAQs.
    / Collectors Grade packaging

Product Specs

Manufacturer Jiang Xing
Scale Masterpiece
Packaging

MIB (Mint in Box), TFcon 2010 Exclusive Figure, Figure has been opened.

In Stock and Ready to Ship
Usually ships out
same business day
Orders placed by 1PM CT where all items on the order are instock, usually ship out the same day. Orders placed after 1PM CT usually ship out next day, however TFSource will make every effort to ship out every instock order placed within the same business day. Certain restrictions apply, see our FAQs on shipping for more information on specifics.

$249.99 & FREE Shipping

Product Details

Jiangxing JX MetalBeast 01 Winged Dragon transforms from a giant winged dragon to robot and back! Features an impressive figure from Jiangxing with a massive wingspan and the arm of the robot mode is formed from the head of the dragon! Figure stands 30CM/12" tall in beast mode and is approximately MP scaled!

Customer Reviews

4 stars based on 4 reviews Write a Customer Review
4 out of 5 stars
Great figure but not perfect. Handle with care
By SixSixMajin on December 05, 2019
Pros:
- massive size is appropriate to the character and makes for a very impressive display piece
- Aesthetic blends the best parts of both show and original toy's box art giving it the look an MP-like figure should have
- paint is well applied and reasonably sturdy if handled carefully and looks fantastic
- articulation provides most of what you would want or need out of an MP figure
- smart use of die-cast materials gives the figure the balance it needs for posing
- additional face accessories are a nice touch
- all three modes accounted for (even if one of them is stupid, but that's more the source material's fault than the figure)
- option to remove the dragon head and give him a normal hand will appeal to some

Cons:
- figure comes with the dragon head and tail removed and both are a terrifying pain to attach
- paint is reasonably sturdy but not perfect and the aforementioned tail attachment may result in chipped paint and the dragon head attachment WILL result in chipped paint (though if you are as careful as possible, this chipping will only happen in a spot that will never bee seen in any mode)
- bot mode head articulation can be limited in some poses because the tail will collide with the collar spikes. It would have been nice if those spikes were on joints to allow them to move out of the way
- bot mode elbow joint on his left arm is pretty lazily designed and could have been done much better. It can be posed in ways that hide it but it does ruin the aesthetic when you can see it.
- the fact that the entire figure IS coated in paint does mean you have to be much more careful when transforming the figure
- massive size (while impressive) comes with the drawback of making transformation a little unwieldy and makes being more careful a bit more difficult
- light-up feature in dragon head is cool in theory but the light itself stands out far too much, even when off, for a feature with such limited use and slightly ruins the aesthetic

All in all, this is a great looking piece and I don't regret my purchase one bit but it is not without flaws. Handle with care and you should be ok where the paint is concerned but that also means you cannot treat this figure as a toy. If you're cool with leaving it as a display piece and only occasionally transforming/reposing it, then I do highly recommend it. If you're looking for something you can frequently play around with, I would look elsewhere.
My favorite figure EVER!! 10/10
By ESO PRIME on December 03, 2019
OMG!! This guy is beautiful!!! Definitely my favorite figure! He's huge, shiny, joints are strong, transformation isn't hard, and he looks beyond spectacular in my collection. I haven't had any issues with paint chipping but I could see if you were rough with it how it could happen. I almost want to buy another one so I can have one in beast mode and one in robot mode. My only complaint is it doesn't come with the batteries that light up his dragon mouth.
Stay far away
By BadComedy on November 08, 2019
Tolerance issues left and right. Highly visible paint scratches on literally every joint, very badly done paint that isn’t even applied over the entire figures surface. Bens Collectables was either paid to say this was good or they gave him a special copy with no issues because this is trash. Unadulterated trash. $240 worth too.
Amazing figure - based on early prototype
By Transformers At The Moon on November 11, 2018
I was lucky enough to handle an early prototype of this figure at TFNation 2018, where the figure went on display for the first time.

I was surprised by the weight of the figure, it isn't light by any means. The build quality and quality of the plastic was fantastic, far higher than some official and other 3rd Party offerings.

The joint for the left shoulder (dragon head) was loose, but that should be fixed for the final release.

If you are a Beast Wars fans or just love transforming dragons, then this guy is for you .. as long as you have space for it
Write your own Review
Please login before You post your review.