Shop all sites, use one cart!

$150.00 until
  • Free shipping is available for domestic shipments only and only offered on the lowest cost shipping method. This amount is then subtracted on any higher cost shipping methods.
  • Receive reduced shipping on order $150 or more for non-continental US states orders including Alaska, Hawaii, Guam, Puerto Rico regions.
  • International shipping is also reduced on all orders $150 or more, but not free.
  • No code required, free US shipping and reduced international shipping is automatically calculated in checkout!

FansToys FT-08 Grinder - Iron Dibots No.5

by Fans Toys TFsource code: FT08GRIN
  • FREE Shipping
    - Details
    • Free shipping is available for domestic shipments only and only offered on the lowest cost shipping method. This amount is then subtracted on any higher cost shipping methods.
    • Free shipping is available on each domestic order $150 or more, if you split your orders, each must be $150 or more or will not qualify for free shipping
    • International shipping is also reduced on all orders $150 or more, but not free.
    • No code required, free shipping and reduced international shipping is automatically calculated in checkout!
  • Buy this item and earn 195 Source Points! Details
  • C9 Box
    95% of TFSource's inventory ships out in a C9 / "Collectors Grade" to mint grade packaging for no extra charge. A C9 box generally has minimal wear, a kink, or other minor damage to the packaging. By placing an order all customers accept that 5% of the time packaging may be below C9 or collectors grade. For more information on box grading please see our FAQs.
    / Collectors Grade packaging

Product Specs

Manufacturer Fans Toys
Packaging Condition

MISB (Mint in Sealed Box), Case Fresh from a Factory Sealed Case

Out of Stock
$199.99 & FREE Shipping
FansToys FT-08 Grinder - Iron Dibots No.5
Ah shucks, this item is out of stock.But fear not, enter your email address and “Jerry” the Dino, will notify you as soon as it's back instock!
Jerry the Dino
To be notified when

FansToys FT-08 Grinder - Iron Dibots No.5

is back in stock type your email address and click the Submit button.

Product Details

Enter Fans Toys Grinder! This MP scaled figure is fully transformable and stands 10"/25.4CM tall in robot mode. Comes ready for battle with weaponry as shown!

Set Includes:
- Alternate heads/face sculpts for scoria, soar and sever
- Energy Sword
- Gold Crown
- Dual blaster
- Extra head for grinder with red eyes

Customer Reviews

5 stars based on 15 reviews Write a Customer Review
5 out of 5 stars
Best MP Grimlock
By MadTitan on March 28, 2019
Fanstoys have outdone Takara on this one.Its is very well made with smooth transformations.
By mcjimmy on January 03, 2019
first fanstoys figure great weight great plastic feel enjoyable transformation, 10/10
Well pleased
By Vexx on December 19, 2018
Strong joints size is MP
Arrived broken
By Alexander Vigil on December 02, 2018
Needed a Grimlock to size well with my MP10. Beautiful figure but came with the right Dino hand broken off and one of the tail pieces snapped. Not happy.
Glad Fanstoys did a reissue
By celd on November 12, 2018
I missed out on Grinder during the first run, and was on the fence about getting him during the reissue, but I am so glad I bought him along with the G1 style head. He looks great on my self next to MP-10 in dino and bot modes. His proportions are right, and he has the general aesthetic of the animated G1 Grimlock. He is also very heavy and sturdy. He has a lot of detail, but much of it is hard to see because the gray blends it all together, and thus I chose to panel line him, which made a huge difference on an already great figure.
By KERRICK G on October 27, 2018
WAY BIGGER than expected WOW! probably same size as masterpiece oversized. BUT THE FIGURE IS AMAZING! HAVE to buy xtransbots ollie or "wheelie" when buying this guy. G1 accurate,posable but wish it came WITH LR66 BATTERIES! would have seen a light up gun and sword,but it is 10/10 abd comes with extra accessories for other Dinobots "if u have shelve space" lol. huge but not that heavy and very strong joints.
Fanstoys delivers
By Damoodster on October 10, 2018
Awesome figure! This guy is the best bang for your buck in my opinion. Solid joints, nice transformation, and very G1 accurate. The best dinobots set by far. Another home run for Fanstoys
haven't seen anything as good as this grimlock
By deathstroke on September 20, 2018
transform easily and is very well put together
By Mkaose on October 03, 2017
I know a lot of people weren't as excited about this one since we have an official masterpiece already, but this is the one I was most excited about. I like the official one, but it is too small. I am not really into just over-sized KOs, so this solved it. He took cues from the official one and improved in several areas. And he has WEIGHT! I love it, just what I wanted for my collection.
Me Grinder King!
By Dylanus Prime on August 10, 2017
Ok, is he better than MP Grimlock? Dunno, I think MP Grimmers is a great figure, but Grinder dos have that Die-Cast edge and he's to scale with all the other FT dinos.
Casting comparisons aside, as a figure he is superb.
Again, step up in both finish and transformation design. You get some weird extras on top of his blaster and sword, like an extra head for Scoria and some 'platform shoes' for MP Grimlock. Which I thought was kinda funny, a bit like Grinder's asking him to 'step up'!
Anyway, I digress, Grinder is a superb final addition to the FT Dinos. I have both incarnations of the King and Grinder feels like he's as much a Masterpiece as the official Grimlock, but he's also his own figure; happily residing over his peers in the FT Dinobot line-up.
A Perfect Finish
By OldManRoundo on March 20, 2017
Since I already had an MP-08 Grimlock, Grinder was the only Iron Dibot I wasn't sure I should get. Having him in hand, however, has completely turned me around. He's the perfect end-cap to an outstanding set of unofficial dinobots. And can we just take a minute to acknowledge FansToys willingness to fix past mistakes? I wasn't bothered by the old faces, but now they're even better. I won't have to fear breaking Soar's shins anymore either. FansToys have proven yet again that a figure from them is money well spent.
The New King
By Gunsmoke04 on March 18, 2017
I have the Takara MP Grimlock and honestly this figure trumps him on every level. He has weight to him, like the rest of the DiBots, and the MP just feels flimsy in comparison. Even if Takara takes on some more Official MP Dinobots, I think they'll fall short of Fans Toys. This whole line is fantastic!
By G33sixxx on March 13, 2017
The caption say's it all... FansToys has completely out done themselves. The scale on this guy... AMAZING! The transformation simple! And the detail.... true homage to G1 Grimlock in everyway... EASILY THE CLEANEST AND BEST FIGURE (in my book) THEY EVER MADE!
Don't pass him up ppl! You'll regret losing out on this one if you do....
By TRANSFAN73 on March 10, 2017
Fanstoys has done it again. Grinder (grimlock) is a true masterpiece. Yes his transformation is simple. but he transforms flawlessly. Both modes look awesome. Yes his waist is a little small. But he looks great next to the other dinos. The extra parts for the other dinobots will only enhance the overall look of this line. This is the kind of quality you expect from Fanstoys. Good diecast. Close to the G1 look. Don't get me wrong i like Takara's MP line. but this is how big their Grimlock should have been. 1000 bucks is not to much for this line. If I could afford to buy them again so i could have both modes on my shelf I would. i you can afford to buy him you should. YOU NOT BOZO YOU KING!!!!!!!!!!
By MagnetHero on March 10, 2017
What more can I say that reviewers like Emgo, Peaugh, and Optibotimus haven't already said. This is the one guys. If you ever wanted a masterpiece Grimlock then look no further because it just won't get any better. I love how the legs are bulked out when cleverly concealing the tail and I love his gigantic presence in dino mode. My only complaint is that my current space is just too small now to house all my masterpiece bots.
Write your own Review
Please login before You post your review.