Jerry's Stocking Stuffer! • FREE Mystery Gift! • With $300 Instock Purchase 

Shop all sites, use one cart!

$150.00 until FREE SHIPPING!

Fans Toys FT-19 - Apache

by Fans Toys TFsource code: FT19APAC
  • FREE Shipping on orders over $150
    - Details
    • Free shipping is available for domestic shipments only and only offered on the lowest cost shipping method. This amount is then subtracted on any higher cost shipping methods.
    • Free shipping is available on each domestic order $150 or more, if you split your orders, each must be $150 or more or will not qualify for free shipping
    • International shipping is also reduced on all orders $150 or more, but not free.
    • No code required, free shipping and reduced international shipping is automatically calculated in checkout!
  • Buy this item and earn 135 Source Points! Details
  • C9 Box
    95% of TFSource's inventory ships out in a C9 / "Collectors Grade" to mint grade packaging for no extra charge. A C9 box generally has minimal wear, a kink, or other minor damage to the packaging. By placing an order all customers accept that 5% of the time packaging may be below C9 or collectors grade. For more information on box grading please see our FAQs.
    / Collectors Grade packaging

Product Specs

Manufacturer Fans Toys
Packaging MISB (Mint in Sealed Box), Case Fresh from a Factory Sealed Case
Out of Stock
$139.99
Fans Toys FT-19 - Apache
Ah shucks, this item is out of stock.But fear not, enter your email address and “Jerry” the Dino, will notify you as soon as it's back instock!
Jerry the Dino
To be notified when

Fans Toys FT-19 - Apache

is back in stock type your email address and click the Submit button.
×

Product Details

Fans Toys FT-19 Apache stands 24CM/9.6" tall in robot mode and contains die-cast parts. With 3 modes, Apache changes from robot to helicopter to armored car and back!

Customer Reviews

4 stars based on 8 reviews Write a Customer Review
4 out of 5 stars
Arcee recommended him
By RSB43 on December 14, 2018
Springer is in my top 5 of Transformers characters, maybe in my top 3. So, if was inevitable that I would eventually get Fans Toys' version of him. He's fantastic, The color scheme is just right, the face sculpt as usual, is well done, and the diecast is the perfect amount, and placed where it should be. The car and copter mode finish 3rd and 2nd, in comparison to the awesome robot mode. But I find them good, even though the car mode is a little longer than it should be, and the helicopter mode gets a little narrow midway down. in the tail section. The front in copter mode makes me think of Jimmy Durante. But, it still gives a solid, stout impression regardless. The leg transformation is a typical FansToys mess, but boy, does he clean up well when in robot mode! I favor Unique Toys a little more overall, due to it's fun, and enjoyable balanced transformation, and it's 3 modes look more accurate to the cartoon. But FansToys Apache is just so beautifully done, especially the Robot mode. Quality plastic, paint, and sculpt as always. I now have 4 MP styled Springers, along with a few other variations of him, and FansToys version is #2 for me, and I'm very happy with him.....worth the price, and very recommended! XTransbots Virtus is next.....
Great representation of Springer, compact transformation, and confusing instructions
By celd on November 17, 2018
I was more pleased with this figure than I expected. His representation of Springer fits well with the movie and the aesthetic of other FansToys figures. He feels very solid, and his transformations into vehicle and helicopter alt modes result in solid-feeling forms. He feels as high quality as Sovereign (Galvatron). Yet, his transformation is a bit fickle because the instructions are not clear enough with what to do with his legs. But, after a few transformations, he seems simple enough. I will note that my copy required surgery on the foot to remove excess plastic material that kept the foot from extending flat in helicopter mode. On the up side, the effort to cut the plastic off and durability of joints proved Apache is made of high quality materials. Buy this guy if you have been on the fence. I was, and glad I got off and bought him.
One of the Best
By Tim on October 12, 2018
All around a great representation of Springer.

The only criticism is that his hands and forearms are very large, and if you stare at him long enough, he starts to look like a Sasquatch.
Not that much of a fan.
By The Fatman on September 14, 2018
While he does look good transformed. Most of the transformation action is in his legs, instructions don't make things too clear. And he's surprisingly fragile.
Solid figure
By TheLastWrecker on July 09, 2018
The bot mode is the clear winner here because I'm not a fan at all of either alt mode. The windshield is too small and both alt modes are badly flawed. They have done great with keeping the color scheme as close to the cartoon, and the head mode is really good. This is a solid figure, but it's just not the Springer I envisioned. Side note: I don't think any company will be able to perfect this guy, but this is as good of an attempt as most will see.
TRANSFORMATION IMPOSSIBLE
By Brett Beighley on June 01, 2018
This figure in robot mode is beyond amazing, BUT the transformation is made impossible by incredibly complicated feet/legs moves that are utterly unexplained by the useless photo-only instructions. For this kind of money, I would’ve expected supporting materials (i.e. step by step instructions) or perhaps a more interactive website with some how-to videos. I understand that this is a Chinese company and they may not feel it necessary yet to provide more support for American customers, but if I can’t transform my Transformer, then what am I paying for?
Worth the effort
By David Williams on April 19, 2018
Springer has always been one of my favorite post TF:TM characters, and I was pretty excited for this. The transformation seems a bit overly-complicated, and the instructions themselves are less than clear at times. It's tough to get everything exactly where it needs to go with so many joints and pegs.
Having said that however, it's more than just a faithful G1 tribute, and I feel like my MP figures aren't good enough to stand next to it. Is that blasphemy?
I almost skipped this guy and that would have been a mistake
By Tobor Yeknom on April 14, 2018
So I was a slamdunk for fans toys! figure has remarkable heft, great articulation, and is true to the original animation model. Earlier this year I purchased Open and Play’s Big Spring and I am still happy with it. But there is truly no comparison between the two. If you are thinking about getting this figure do not hesitate! Worth every penny!! There were no QC issues with this figure. The instructions could have been a little clearer in some spots, but not hard to figure out. The car mode was the weakest because I felt it was a little too long but that’s just my preference. The helicopter mode is amazing though the rotor blade does not turn as freely as I would like but again, forgivable. This, for me, is the definitive representation of this character and will go well on my masterpiece shelf
Write your own Review
Please login before You post your review.