Shop all sites, use one cart!

$150.00 until FREE SHIPPING!

Fans Hobby - Master Builder - MB-08 Double Evil

by Fans Hobby TFsource code: FHMB08EVIL
  • FREE Shipping
    - Details
    • Free shipping is available for domestic shipments only and only offered on the lowest cost shipping method. This amount is then subtracted on any higher cost shipping methods.
    • Free shipping is available on each domestic order $150 or more, if you split your orders, each must be $150 or more or will not qualify for free shipping
    • International shipping is also reduced on all orders $150 or more, but not free.
    • No code required, free shipping and reduced international shipping is automatically calculated in checkout!
  • Buy this item and earn 220 Source Points! Details
  • C9 Box
    95% of TFSource's inventory ships out in a C9 / "Collectors Grade" to mint grade packaging for no extra charge. A C9 box generally has minimal wear, a kink, or other minor damage to the packaging. By placing an order all customers accept that 5% of the time packaging may be below C9 or collectors grade. For more information on box grading please see our FAQs.
    / Collectors Grade packaging

Product Specs

Manufacturer Fans Hobby
Packaging MISB (Mint in Sealed Box), Case Fresh from a Factory Sealed Case
In Stock and Ready to Ship
Usually ships out
same business day
Orders placed by 1PM CT where all items on the order are instock, usually ship out the same day. Orders placed after 1PM CT usually ship out next day, however TFSource will make every effort to ship out every instock order placed within the same business day. Certain restrictions apply, see our FAQs on shipping for more information on specifics.

$224.99 & FREE Shipping

Product Details

Fans Hobby - Master Builder - MB-08 Double Evil by Fans Hobby is Masterpiece Scaled and ABS & Die-cast parts! This figure stands 15"/38CM tall in robot mode and transforms into a tank/plane/base to robot and back! Figure is made of high quality ABS, and features stainless steel etching plates in the cockpit area detailing. Includes his massive gun as shown!

Figure Includes:
- 1 x Figure
- 1 x Gun
- Highly Posable
- 1 x Mini Figure
- ABS, Stainless steel etching plates (cockpit area details)

Customer Reviews

5 stars based on 5 reviews Write a Customer Review
5 out of 5 stars
Roaddog83
By Roaddog 83 on March 13, 2019
Wow, this guy is awesome. One of my favorites so far. I know some of the video reviews knock him for his feet and having difficulty standing straight up but let’s face it, nobody poses their figures like they are saluting at attention. Put him in a good dynamic pose and he stands just fine.
The paint apps are great where applied. The face sculpt is fantastic. The size and shelf presence is amazing when standing next to other mp’s.
Only problem I have is trying to find space in my Detolf for him and Powerbaser to share a space together. Get him he is worth the price.
One of the biggest and best looking, he doesn't need your permission!
By Theodoric on March 09, 2019
This has always been a character that I really loved, due to his mysteriousness, the complixity of where he comes from. Ultimately though, no other figures have showed any interest, except for this one.

Fanshobby really paid attention to the detail of the show, there are some things that are a little off or distracting. Little things, such as the holes on the ramp. A lot of people said he has issues standing and he might fall backwards. He does tend to lean backwards, but positioning the right way leads to a proper pose where he will stand upright with no support. It's not really a problem in my opinion. Adjust the ankles before adjusting the hips or knees. I found that to be helpful, especially when standing straight up.
However, there are some tabbing issues I've had, such as the arms when you close the thruster to seal the hand in. For some reason that requires a really big push. A lot of people didn't like how the little robot guys would fall out, but if you push them in ever so slightly, they'll tab right in. Even without the panel holding them there. Which doesn't release the mechanism for the guns to pop out. You have to press a little harder for those to release, which I believe is good. I think the neck is a little skinny, it can wobble back and forth but not loosely. The head can be difficult to pose but you just have to work at it. I'm really concerned about the rails which allow the gun to be held, it feels like a tight squeeze and I am afraid with over stress that it could break, so be mindful of that when you're placing the gun there. Don't apply to much force, otherwise it might snap.

The really big issue with this figure in my opinion, is getting him to jet mode. For this mode, you must line up two tabs to slide into two shallow connector points. Once you do, you push really hard to make the connector on the top of the front part of the jet lock into the back of the jet. Essentially, this is where you'll hear a loud snap and you're looking around and examining the thing if you get it wrong to see if something broke. I would say this is the biggest flaw of this guy. Mainly because it does require a lot of force, especially the first time. It scares me everytime, even when you take it off, you have to press the button. Then you'll hear a snap or like a loud plastic smacking against plastic sound (I don't know how else to describe it.), and it's just really scary to me. It makes me feel like I'm going to break it. However, I didn't and the plastic seems to hold up really well under that stress.

The alt-modes are absolutely massive! They take up a good portion of my coffee table and honestly, sad to say, I may not have enough room to display this figure in either of the alt-modes because they're just so huge! Though I think that's a good thing. Nothing like a base right on your table. He's not small, he's easy to see, every mode looks amazing, and beautifully crafted! If you've been holding out on an Overlord, then this is something you'll want in your collection because of the size, the detail, and show accuracy! this is a premium item. Despite its problems, I feel like my purchase was worth every penny!
extraordinarily amazing
By Erik Spann on March 08, 2019
this figure was way more than i was expecting. i knew he was huge but this was more than expected, he absolutely fits in with my masterpiece decepticons(and i even have him as the center piece) great articulation, the only think i wish was more ab crunch, but the gimmicks with the powermasters makes it understandable. the sculpt is great, the paint is great, the whole thing is just great. deffinantly worth the price, and deffinantly worth five stars.
Excellence
By BotBoy on March 08, 2019
This guy is ready to do battle! He has ratchet joints everywhere and the transformation is a fun-filled adventure. He is very bulky so don't be in a rush and enjoy how he is marvellously designed. The power Masters mega and giga fave elbow and knee joints. No dicast but still has mass to him. All accessories connect securely but one small hiccup is when connecting the front of the jet to and from the body you might want to pop the head off the ball joint 1st because of the design.. he is a must have!!!
Fantastic bot
By Naomasa on March 07, 2019
Wow! This one is awesome, very big and detail.
The transformation was good and the whole thing looks clean. Worth of the money and it does look good next to the MP collections.
Write your own Review
Please login before You post your review.